DTC U0151-08: Lost Communication With Restraints Control Module - Bus signal/message failures: Action
- If this DTC is logged with U0151-00 & B10A2-32, check for fuse failure, restraints control module power and ground circuits for open circuit. Refer to the appropriate system wiring diagrams and check CAN harness
- If this DTC is logged with B10A2-32, or on its own refer to the: appropriate system wiring diagrams and check restraints control module crash signal circuit for short circuit to ground, short circuit to power, open circuit, high resistance
- Using the Jaguar Land Rover approved diagnostic equipment, check restraints control module for DTCs and refer to the relevant DTC index
- Using the Jaguar Land Rover approved diagnostic equipment, complete a CAN network integrity test. Refer to the appropriate system wiring diagrams and check restraints control module power and ground circuits for open circuit. Check CAN harness between engine control module and restraints control module, repair as necessary