DTC U0415-02: Invalid Data Received From Anti-Lock Brake System (ABS) Control Module - General signal failure: Action
NOTE:
Monitor description.
The anti-lock brake system control module CAN messages are being updated on the CAN bus. If the data is not updated and correctly formatted periodically a DTC is set. The monitor is operational when the ignition is ON
- Check anti-lock brake system control module for additional DTCs and refer to the relevant DTC index. Rectify these first
- Using the Jaguar Land Rover approved diagnostic equipment, complete a CAN network integrity test
- Refer to the appropriate system wiring diagrams and check high speed CAN network for short circuit to ground, short circuit to power, open circuit
- Refer to the appropriate system wiring diagrams and check anti-lock brake system control module power and ground circuits for open circuit