DTC B102B-67: Passive Key - Signal incorrect after event: Action
- Re-synchronize ID by reconfiguring the central junction box as a new module. Resynchronize ID by reconfiguring the keyless vehicle module as a new module
- Refer to the appropriate system wiring diagrams and check the keyless vehicle module power and ground circuits for open circuit, high resistance
- Using the manufacturer approved diagnostic system, check the keyless vehicle module for related DTCs and refer to the relevant DTC index
- Using the manufacturer approved diagnostic system, perform a CAN network integrity test. Refer to the appropriate system wiring diagrams and check the medium speed CAN bus circuit for short circuit to ground, short circuit to power, open circuit, high resistance