DTC P2299-24: Brake Pedal Position/Accelerator Pedal Position Incompatible - Signal stuck high: Action
NOTE:
Monitor description.
If the driver is pressing the accelerator pedal and the vehicle is accelerating and the brake pressure is low both brake pedal switches should be off/inactive. If the switches are on/active in this condition then the brake pedal switches have failed and the DTC is set
- Check engine control module for related DTCs and refer to the relevant DTC index
- Check that the brake pedal switch is mounted and correctly positioned on the mounting bracket/pedal box
- Check for smooth operation of the brake pedal switch plunger
- Refer to the appropriate system wiring diagrams and check brake pedal switch 1 circuit for open circuit, short circuit to power, short circuit to ground
- Refer to the appropriate system wiring diagrams and check brake pedal switch 2 circuit for open circuit, short circuit to power, short circuit to ground