DTC U0415-83: Invalid Data Received From Anti-Lock Brake System (ABS) Control Module - Value of signal protection calculation incorrect: Action
NOTE:
Monitor description.
The anti-lock brake system control module CAN messages are being updated on the CAN bus. If the data is not updated and correctly formatted periodically a DTC is set. The monitor is operational when the ignition is ON
- Using the Jaguar Land Rover approved diagnostic equipment, complete a CAN network integrity test
- Refer to the appropriate system wiring diagrams and check high speed CAN network for short circuit to ground, short circuit to power, open circuit
- Refer to the appropriate system wiring diagrams and check anti-lock brake system control module power and ground circuits for open circuit