DTC C104B-18: Rear Axle Rod Pressure Regulating Valve - Circuit current below threshold: Action
- Refer to the appropriate system wiring diagram and check the dynamic response rear actuator rod-side pressure regulating valve coil circuit, harness and connectors for open circuit, high resistance. Repair circuit as required, clear the DTCs and retest
- Refer to the appropriate system wiring diagram and check the resistance of the dynamic response rear actuator rod-side pressure regulating valve coil circuit (nominal value should be 5.1 ohms). Repair circuit as required, clear the DTCs and retest
- If the fault persists, install a new dynamic response valve block as required and reset adaptive data. Clear the DTCs and retest