DTC C0063-27: Yaw Rate Sensor - Signal rate of change above threshold: Action
- Refer to the appropriate system wiring diagrams and check the yaw rate lateral acceleration sensor power and ground circuits for open circuit, high resistance
- Using the manufacturer approved diagnostic system, perform a CAN network integrity test. Refer to the appropriate system wiring diagrams and check the private high speed CAN bus circuit for short circuit to ground, open circuit, high resistance
- Check the installation of the yaw rate lateral acceleration sensor
- Using the manufacturer approved diagnostic system, clear the DTCs and retest. If the fault persists, install a new yaw rate lateral acceleration sensor. Perform routine - Calibrate Acceleration Sensor(s) (0x300F)
- Using the manufacturer approved diagnostic system, clear the DTCs and retest. If the fault persists, install a new anti-lock brake system control module