DTC P0710-27: Transmission Fluid Temperature Sensor "A" Circuit - Signal rate of change above threshold: Action
NOTE:
- Automatic transmission fluid temperature sensor resistance specification is 1 kΩ at 25°C.
- Disconnect the vehicle wiring harness from the Transmission Control Module (TCM). Refer to 418-02 - Wiring Harnesses - General Procedures. Reconnect the vehicle wiring harness, clear the DTCs and retest
- If the fault persists repair or replace the vehicle wiring harness as necessary and retest
- If the fault persists, remove the internal wiring harness from the valve block assembly. Refer to 418-02 - Wiring Harnesses - General Procedures. Reinstall the internal wiring harness, clear the DTCs and retest
- If the fault persists repair or replace the internal wiring harness as necessary and retest
- If the fault persists, contact the technical support desk for further assistance