DTC P2763-15: Torque Converter Clutch Pressure Control Solenoid Control Circuit High - Circuit short to battery or open: Action

NOTE: After installing a new transmission control module, perform routines - Configure New Module (Without Transmission Replacement), Transmission Control Module Adaption.

Refer to the electrical circuit diagrams and check the torque converter pressure control valve solenoid circuit for short circuit to power, open circuit, high resistance. Repair the wiring harness or install a new solenoid as necessary
Using the Jaguar Land Rover approved diagnostic equipment, clear the DTCs and retest. If the fault persists, install a new transmission control module