DTC C200B-01: Steering Shaft Torque Sensor 1 - General electrical failure: Action

NOTE: DO NOT reset the DTCs. Record the diagnostic session and upload to JLR. Failure to follow this instruction may result in warranty claim becoming invalid

Refer to the electrical circuit diagrams and check the security and integrity of the power steering control module torque sensor circuit cable and connectors. Repair or replace circuit(s)/connector(s) as required. Clear the DTCs and retest
Using the Jaguar Land Rover Approved Diagnostic Equipment, clear the DTCs and retest. If the fault persists, check and install a new steering gear as required