DTC C1119-62: Hydraulic Pressure - Signal compare failure: Action

Check and top up the hydraulic fluid as required
Check integrity of hydraulic system and rectify any leaks as required. Carry out manual bleed procedure. Clear the DTCs and retest
If the fault persists, install a new valve block. Clear the DTCs and retest
If the fault persists, install a new pressure transducer. Clear the DTCs and retest
If the fault persists, install a new filter. Clear the DTCs and retest
If the fault persists, check the operation of the front and rear actuators and install new actuator(s) as required. Clear the DTCs and retest
If the fault persists, install a new drop link (s) or stabilizer bar(s). Clear the DTCs and retest