DTC C1B11-1D: Pressure Control Valve - Circuit current out of range: Action
- Refer to the appropriate system wiring diagram and check the pressure control valve circuit, harness and connectors for short circuit to ground, short circuit to another circuit. Repair circuit as required, clear the DTCs and retest
- Refer to the appropriate system wiring diagram and check the resistance of the pressure control valve circuit (nominal value should be 5.1 ohms). Repair circuit as required, clear the DTCs and retest
- If the fault persists, check and install a new dynamic response valve block as required and clear adaptive data. Clear the DTCs and retest