DTC P0919-94: Gear Shift Position Control Error - Unexpected operation: Action

Using the Jaguar Land Rover approved diagnostic equipment, select the DTC-associated Guided Diagnostics to facilitate a transfer case clutch calibration. The Guided Diagnostics will subsequently test the system and report a DTC if a fault persists
Using the Jaguar Land Rover approved diagnostic equipment, clear the DTCs and cycle the ignition
Start the engine and, using the Jaguar Land Rover approved diagnostic equipment, read the DTCs. If the fault persists, install a new transfer case control module and configure as a new module. Refer to the Transfer Case Control Module Replacement Application instructions in the relevant Diagnosis and Testing Section
Refer to: TRANSFER CASE .

Using the Jaguar Land Rover approved diagnostic equipment, clear the DTCs and retest