DTC B13CD-93: Roof Blind - No operation: Action
NOTE:
To validate the repair run the engine for at least 30 seconds and operate the roof blind several times, then using the Jaguar Land Rover approved diagnostic equipment check that this Diagnostic Trouble Code(s) is not set within the body control module
- Using the Jaguar Land Rover approved diagnostic equipment, clear the Diagnostic Trouble Code(s) and perform the full open/close operation 3 times
- Using the Jaguar Land Rover approved diagnostic equipment, perform the routine - Calibrate Roof Blind (204C).
- Using the Jaguar Land Rover approved diagnostic equipment, clear stored Diagnostic Trouble Code(s)
- Perform the full open/close operation 3 times
- If the fault is still present, install a new front roof blind control module and then perform the following:
- Using the Jaguar Land Rover approved diagnostic equipment, clear stored Diagnostic Trouble Code(s)
- Perform the full open/close operation 3 times