DTC B00A0-51: Occupant Classification System - Not programed: Action

NOTE:

To clear this DTC, the existing module programing procedure must first be performed
If a new occupant classification sensor service kit is installed the new module replacement and programing procedure must be performed
Do not attempt to install individual components from the occupant classification sensor service kit, as they are calibrated to function as a single assembly

Using the Jaguar Land Rover approved diagnostic equipment, clear the Diagnostic Trouble Code(s) and retest. If the fault persists reprogram the occupant classification sensor control module. Refer to AIRBAG AND SAFETY BELT PRETENSIONER SUPPLEMENTAL RESTRAINT SYSTEM (G2932682)
If the fault persists, check and install a new occupant classification kit and follow the reprogramming procedure. Refer to AIRBAG AND SAFETY BELT PRETENSIONER SUPPLEMENTAL RESTRAINT SYSTEM (G2932682)