DTC U0455-64: Invalid Data Received From Restraints Occupant Classification System Module - Signal plausibility failure: Action

NOTE:

To clear this DTC, the existing module programing procedure must first be performed
If a new occupant classification sensor service kit is installed the new module replacement and programing procedure must be performed
Do not attempt to install individual components from the occupant classification sensor service kit, as they are calibrated to function as a single assembly
Rectify all occupant classification system related Diagnostic Trouble Code(s) before clearing Diagnostic Trouble Code(s)

Using the Jaguar Land Rover approved diagnostic equipment, check communication with occupant classification sensor control module
Using the Jaguar Land Rover approved diagnostic equipment, clear the Diagnostic Trouble Code(s) and retest. If the fault persists reprogram the occupant classification sensor control module. Refer to AIRBAG AND SAFETY BELT PRETENSIONER SUPPLEMENTAL RESTRAINT SYSTEM (G2932682)
If the fault persists, check and install a new occupant classification kit and follow the reprogramming procedure. Refer to AIRBAG AND SAFETY BELT PRETENSIONER SUPPLEMENTAL RESTRAINT SYSTEM (G2932682)