DTC B151F-31: Auxiliary Cooling Fan - No signal: Action
NOTE:
- Only replace the image processing module (IPMA) if DTC C1001-49 is also set
- This DTC is set if no feedback from the fan signal is received for more than 5 seconds
- Refer to the appropriate service information and check the image processing module (IPMA) cooling fan circuit for open circuit, high resistance. Repair the wiring harness as necessary
- Using the Jaguar Land Rover approved diagnostic equipment, clear the Diagnostic Trouble Code(s) and retest. If the fault persists, install a new image processing module (IPMA)