DTC C1052-1D: Hold Current-Safety Control Valve - Circuit current out of range: Action
WARNING: This page is about a different car, the 2021 Land Rover Range Rover and 2020 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
- Refer to the appropriate system wiring diagrams and check the dynamic response safety control valve coil circuit, harness and connectors for short circuit to ground, open circuit, high resistance. Repair circuit as required, Clear the DTCs and retest
- Refer to the appropriate system wiring diagrams and check the resistance of the dynamic response safety control valve circuit (nominal value should be 1.9 ohms). Repair circuit as required, clear the DTCs and retest