DTC C1B11-18: Pressure Control Valve - Circuit current below threshold: Action
WARNING: This page is about a different car, the 2021 Land Rover Range Rover and 2020 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
- Refer to the appropriate system wiring diagrams and check the pressure control valve circuit, harness and connectors for open circuit, high resistance. Repair circuit as required, clear the DTCs and retest
- Refer to the appropriate system wiring diagrams and check the resistance of the pressure control valve circuit (nominal value should be 5.1 ohms). Repair circuit as required, Clear the DTCs and retest
- If the fault persists, install a new dynamic response valve block as required and clear adaptive data. Clear the DTCs and retest