DTC U2300-64: Central Configuration - Signal plausibility failure: Action
WARNING: This page is about a different car, the 2021 Land Rover Range Rover and 2020 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
- Using the Jaguar Land Rover approved diagnostic equipment, confirm correct dynamic response control module calibration data and software versions are installed and update as required. Clear the DTCs and retest
- If the fault persists, using the Jaguar Land Rover approved diagnostic equipment, check and update the car configuration file as necessary
- After updating the car configuration file, set the ignition to on and wait 40 seconds before clearing the DTCs and retesting