DTC U2300-55: Central Configuration - Not configured: Action
WARNING: This page is about a different car, the 2021 Land Rover Range Rover and 2020 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Do Not replace the infotainment master controller/infotainment slave controller for this DTC alone
- After updating the car configuration file, set the ignition to on and wait 30 seconds before clearing the Diagnostic Trouble Code(s)
- Using the Jaguar Land Rover approved diagnostic equipment, check and update the car configuration file as necessary. Clear the Diagnostic Trouble Code(s) and retest
- If the fault persists, using the Jaguar Land Rover approved diagnostic equipment, reconfigure the infotainment master controller/slave controller (where installed) with the latest level software