DTC B00C0-7B: Passenger Seat Occupant Classification Sensor A - Low Fluid Level: Action
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 Land Rover Range Rover Evoque, 2018 Land Rover Range Rover Evoque, 2017 Land Rover Range Rover Evoque, 2016 Land Rover Range Rover Evoque, and 2015 Land Rover Range Rover Evoque. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Do not attempt to install individual components from the service kit as they are calibrated to function as a single assembly.
- Check the installation of the seat
- Check the integrity of the occupant classification sensor bladder hose. Re-attach as necessary. Using the Jaguar Land Rover approved diagnostic equipment, clear the DTCs and retest
- Using the Jaguar Land Rover approved diagnostic equipment, clear the DTCs and retest. If fault persists, install a new occupant classification sensor service kit as (complete service kit consists of foam, occupant classification sensor bladder mat with attached smart digital pressure sensor)