DTC P262B-84: Control Module Power Off Timer Performance - Signal below allowable range: Action
- Vehicle Conditions to Enable DTC Setting Strategy
- Activated when ignition switched off
- Prioritized Checks to Perform
- Inspect connectors for signs of water ingress and pins for damage and/or corrosion
- Refer to the electrical circuit diagrams and check the FlexRay network circuit for short circuit to ground, short circuit to power, open circuit, high resistance. Repair the wiring harness as necessary
- Using the Jaguar Land Rover approved diagnostic equipment, run application - ECU Diagnostics/Powertrain Control Module (PCM)/Clear Diagnostic Trouble Code(s). Retest. If the fault persists, install a new powertrain control module and run application - ECU Diagnostics/Powertrain Control Module (PCM)/Replace ECU