DTC P00E9-84: Intake Air Temperature Sensor 3 Circuit Range/Performance Bank 1 - Signal below allowable range: Action
- Vehicle Conditions to Enable DTC Setting Strategy
- Allow the vehicle to cool for greater than 8 hours. Start the engine and allow to idle for 10 seconds
- Prioritized Checks to Perform
- Check for signs of battery disconnection
- Check the operation of the block heater. Rectify as necessary
- Refer to the electrical circuit diagrams and check the manifold absolute pressure and temperature sensor circuit for short circuit to ground, short circuit to power, open circuit, high resistance. Check the electrical connectors for evidence of water ingress. Check the terminals for damage and corrosion. Repair the wiring harness as necessary
- Install a new manifold absolute pressure and temperature sensor
- Using the Jaguar Land Rover approved diagnostic equipment, run application - ECU Diagnostics/Powertrain Control Module (PCM)/Clear Diagnostic Trouble Code(s). Retest