DTC P0251-13: Injection Pump Fuel Metering Control "A" (Cam/Rotor/Injector) - Circuit open: Action
NOTE:
Do NOT replace the powertrain control module for this DTC, unless the powertrain control module connector pins are damaged or corroded.
- Vehicle Conditions to Enable DTC Setting Strategy
- Engine running
- Prioritized Checks to Perform
- Refer to the electrical circuit diagrams and check the high pressure fuel pump circuit for open circuit. Check the electrical connectors for evidence of water ingress. Check the terminals for damage and corrosion. Repair the wiring harness as necessary
- Using the Jaguar Land Rover approved diagnostic equipment, run application - ECU Diagnostics/Powertrain Control Module (PCM)/Clear Diagnostic Trouble Code(s). Retest
- Install new high pressure fuel pump