DTC U3000-54: Control Module - Missing Calibration: Action
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 Land Rover Range Rover Evoque, 2018 Land Rover Range Rover Evoque, 2017 Land Rover Range Rover Evoque, 2016 Land Rover Range Rover Evoque, and 2015 Land Rover Range Rover Evoque. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The following pre-conditions are required to run the routine successfully: Ignition is set to on, the occupant classification sensor control module has passed the seat assembly plant calibration, no collision event received from the restraints control module during the current ignition cycle, no DTCs set in the current ignition cycle, occupant classification sensor control module has settled for 10 seconds, ambient temperature is 6°C (42°F) to 36° C (97°F), seat is installed in original position.
- Using the Jaguar Land Rover approved diagnostic equipment, perform routine - Learn Seat Occupant Classification Zero Position