DTC B14AD-02: Front Display Screen - General signal failure: Action
NOTE:
If this DTC is set simultaneously with other Diagnostic Trouble Code(s) including U200F-11, check symptoms for U200F-11 first, rectify the fault, clear Diagnostic Trouble Code(s) and retest
- Check that the front display is working, if the display is working go to step 4. If there is no display go to step 2
- Using the Jaguar Land Rover approved diagnostic equipment, perform routine - On Demand Self Test (0x0202) and read the Diagnostic Trouble Code(s). If the DTC is set go to step 3, if the DTC is no longer set go to step 4
- Refer to the appropriate system wiring diagrams and check the interactive display module A APIX circuit for short circuit to ground, short circuit to power, open circuit, high resistance. Repair the wiring harness as necessary. Clear the Diagnostic Trouble Code(s) and retest
- Check the infotainment master controller software release notes to see if a repair is available and update the infotainment master controller and repeat step 2. If no software update is available go to step 5
- Check the interactive display module A for any internal failure Diagnostic Trouble Code(s) and follow the DTC index
- Check for other Diagnostic Trouble Code(s) relating to the customer concern and follow the DTC index