DTC B14B8-13: BroadR-Reach Link - Infotainment Slave - Link #2 (+) - Circuit open: Action
NOTE:
Do Not
replace the infotainment master controller or infotainment slave controller for this DTC alone
- Using the Jaguar Land Rover approved diagnostic equipment, perform routine - On Demand Self Test (0x0202) and read the Diagnostic Trouble Code(s). If the DTC is set go to step 2, if the DTC is no longer set go to step 3
- Refer to the appropriate system wiring diagrams and disconnect the infotainment slave controller BroadR-Reach® Link #2 circuit from the infotainment master controller and perform step 1. Check infotainment slave controller BroadR-Reach® Link #2 open circuit DTC, if the DTC is set refer to the system wiring diagrams and check the infotainment slave controller BroadR-Reach® Link #2 circuit for open circuit, high resistance. Repair the wiring harness as necessary
- Using the Jaguar Land Rover approved diagnostic equipment, check the infotainment master controller software release notes to see if a repair is available and update the infotainment master controller. Clear the Diagnostic Trouble Code(s) and retest