DTC P164C-62: Internal Control Module Start-Stop Performance - Signal compare failure: Action
- Prioritised steps to perform:
- Using the Jaguar Land Rover approved diagnostic equipment, perform an ECO-start and monitor the engine speed and engine/transmission start/stop and position signals
- Using the Jaguar Land Rover approved diagnostic equipment, check the powertrain control module for related Diagnostic Trouble Code(s) and refer to the relevant DTC index
- Clear Diagnostic Trouble Code(s). Perform ECO-start and re-check Diagnostic Trouble Code(s)
- If the fault persists, raise a Technical Assist (TA) for further support