P06DA-13: Engine Oil Pressure Control Circuit Open - Circuit open: Action
- Vehicle Conditions to enable DTC Logging Strategy
- Ignition on, engine running
- Prioritized Checks to Perform
- Using the Jaguar Land Rover approved diagnostic equipment check datalogger signal
- Oil Pump Control - Solenoid Position (0x05A4)
- Inspect connectors for signs of water ingress, and pins for damage and/or corrosion
- Refer to the electrical circuit diagrams and check the variable oil pump solenoid circuit for
- Fuse failure
- Short circuit to ground
- Short circuit to power
- Open circuit
- High resistance
- Install new variable oil pump solenoid, only when diagnosed as failed
- Using the Jaguar Land Rover approved diagnostic equipment, clear all stored Diagnostic Trouble Codes and retest