DTC U2300-54: Central Configuration - Missing calibration: Action

NOTE:

Do not replace the restraints control module for this DTC
After updating the car configuration file, set the ignition to on and wait 30 seconds before clearing the Diagnostic Trouble Code(s)

Using the Jaguar Land Rover approved diagnostic equipment, check and update the Car Configuration File (CCF) as required. Perform routine - Allow Central Configuration Data Learning (0x0E06). Clear the Diagnostic Trouble Code(s) and retest
Check if the gateway module is broadcasting the correct car configuration file. Check the gateway module for car configuration file related Diagnostic Trouble Code(s) and refer to the relevant DTC index