DTC B112C-55: Interior Motion Sensor - Not Configured: Action

NOTE: To validate the repair activate the ignition for at least 30 seconds and check that this DTC is no longer set within the body control module. Then Lock/Double Lock the vehicle through the remote key to arm the Interior Motion Sensor (Market dependent). Wait for at least 60 seconds and check the volumetric sensor function by waving a hand backward and forward near the volumetric sensor. The full alarm should sound. Then use the Jaguar Land Rover approved diagnostic equipment to check this DTC is no longer set within the body control module

Using the Jaguar Land Rover approved diagnostic equipment, calibrate the volumetric sensor by performing the diagnostic routine - Calibrate Intrusion Sensor (2227)