DTC B1206-02: Crash Occurred - General signal failure: Action
NOTE:
The FlexRay wiring harness must not be repaired by making a localized wiring repair. A new wiring harness should be installed
- Refer to the electrical circuit diagrams and check the crash signal circuit for short circuit to ground, short circuit to power, open circuit, high resistance. Replace the wiring harness as necessary
- Refer to the electrical circuit diagrams and check the FlexRay bus circuit for short circuit to ground, short circuit to power, open circuit, high resistance. Replace the wiring harness as necessary
- Using the Jaguar Land Rover approved diagnostic equipment, check the restraints control module for related DTCs and refer to the relevant DTC index