DTC P0A2A-2A: Drive Motor "A" Temperature Sensor Circuit - Signal stuck in range: Action
- Using the Jaguar Land Rover approved diagnostic equipment, run application - ECU Diagnostics/Electric Power Inverter Converter Control Module (EPIC)/Update ECU
- Refer to the electrical circuit diagrams and check the crank integrated motor generator temperature sensor circuit for short circuit to ground, short circuit to power, open circuit, high resistance. Install a new wiring harness as necessary
- Using the Jaguar Land Rover approved diagnostic equipment, run application - ECU Diagnostics/Electric Power Inverter Converter Control Module (EPIC)/Clear DTCs. Retest. If the fault persists, raise a Technical Assistance (TA):
- Attach the Pathfinder session file using 'Pathfinder Sessions'
- Use the DTC as a reference number in the Customer Comments field
- Describe primary and secondary diagnostics completed