DTC U0415-68: Invalid Data Received From Anti-Lock Brake System (ABS) Control Module - Event information: Action
- Vehicle Conditions to enable DTC Logging Strategy
- Ignition ON, engine running greater than 1 minute then slowly sweep brake pedal from upper rest point to floor and hold for 2seconds
- Prioritized Checks to Perform
- Using the Jaguar Land Rover approved diagnostic equipment check "Network Overview" for off bus control modules. Refer to electrical circuit diagrams and check CAN circuits if required
- Check powertrain control module for additional DTCs and refer to relevant DTC index. Rectify these first
- Check anti-lock brake system control module for related DTCs and refer to relevant DTC index
- Refer to the electrical circuit diagrams and check the power and ground connections to the anti-lock brake system control module
- Install new pressure sensor, only when diagnosed as failed
- Clear the DTC and retest