Transfer Case Control Module (G2413536): Installation

- Install the TCCM .
- Install and tighten the 2 bolts.
  Torque : 18 Nm
Connect the electrical connector.
Connect the startup battery ground cable.
Refer to: 12V SYSTEM DISCONNECT AND CONNECT
- Connect the Jaguar Land Rover (JLR) approved diagnostic equipment to the vehicle.
  General Equipment: Jaguar Land Rover approved diagnostic equipment
- Start the diagnostic service function "transfer case-transfer case replacement".
- Clear any Diagnostic Trouble Code(s) (DTC) after calibration and check for correct operation.