LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2021 >> Defender 110 X >> Repair and Diagnosis (Single Page) >> General Information >> Specifications Index >> Diagnostic Trouble Code Index DTC: Head Up Display (HUD) -- Defender/L663 >> Diagnostic Trouble Code Index - DTC: Head Up Display (HUD) (G2400895) >> Description And Operation >> Head Up Display Control Module (HUDCM) >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Head Up Display Control Module (HUDCM): Notes

CAUTION: Diagnosis by substitution from a donor vehicle is NOT  acceptable. Substitution of control modules does not guarantee confirmation of a fault, and may also cause additional faults in the vehicle being tested and/or the donor vehicle.
NOTE:
  • Guided Diagnostics must be followed and the repair advised by the process completed. Failure to do so may result in the rejection of any warranty claim made.
  • If a control module or a component is suspect and the vehicle remains under manufacturer warranty, refer to the Warranty Policy and Procedures manual, or determine if any prior approval program is in operation, prior to the installation of a new module/component.
  • Generic scan tools may not read the codes listed, or may read only 5-digit codes. Match the 5 digits from the scan tool to the first 5 digits of the 7-digit code listed to identify the fault (the last 2 digits give extra information read by the Jaguar Land Rover approved diagnostic equipment).
  • When performing voltage or resistance tests, always use a digital multimeter that has the resolution ability to view 3 decimal places. For example, on the 2 volts range can measure 1mV or 2 K Ohm range can measure 1 Ohm. When testing resistance always take the resistance of the digital multimeter leads into account.
  • Check and rectify basic faults before beginning diagnostic routines involving pinpoint tests.
  • Inspect connectors for signs of water ingress, and pins for damage and/or corrosion.
  • If DTCs are recorded and, after performing the pinpoint tests, a fault is not present, an intermittent concern may be the cause. Always check for loose connections and corroded terminals.
  • Check JLR claims submission system for open campaigns. Refer to the corresponding bulletins and SSMs which may be valid for the specific customer complaint and carry out the recommendations as required.

The DTC Index lists all Diagnostic Trouble Codes (DTCs) that could be logged in the Head Up Display Control Module (HUDCM). For additional diagnosis and testing information, refer to the relevant Diagnosis and Testing service information. For additional information, refer to:

INFORMATION AND MESSAGE CENTER ,

INSTRUMENT PANEL CLUSTER .