DTC U201A-56: Control module main calibration data - Invalid/incompatible configuration: Action
- Using the Jaguar Land Rover approved diagnostic equipment, inspect the GWM software is up to date and matching the vehicle Bill Of Materials (BOM). Update if required
- Using the Jaguar Land Rover approved diagnostic equipment, inspect the ADC NVH calibration is up to date and matching the vehicle Bill Of Materials (BOM). Update if required
- Using the Jaguar Land Rover approved diagnostic equipment, reset the AAM (11 01)
- Using the Jaguar Land Rover approved diagnostic equipment, clear the Diagnostic Trouble Codes (14 FF FF FF) and retest
- Using the Jaguar Land Rover approved diagnostic equipment, read the Snapshot Data Identifier 19 (SID19) Diagnostic Trouble Codes (19 02 08). If the Diagnostic Trouble Code persists raise a TA