DTC U2013-02: Switch Pack - General signal failure: Action
- Refer to the electrical circuit diagrams and check the steering wheel switchpack power and ground circuits for open circuit, high resistance. Repair the wiring harness as necessary. Clear the Diagnostic Trouble Code(s) and retest
- Refer to the electrical circuit diagrams and check the LIN bus circuit for short circuit to ground, short circuit to power, open circuit, high resistance. Repair the wiring harness as necessary. Clear the Diagnostic Trouble Code(s) and retest
- Using the Jaguar Land Rover approved diagnostic equipment, clear the Diagnostic Trouble Code(s) and retest. If the fault persists, install a new steering wheel switchpack