DTC B100D-96: Column Lock Authorisation - Component internal failure: Action

NOTE: Prior to clearing this DTC, perform routine - Vehicle Reset.

Turn the steering wheel to make sure that the electric steering column lock mechanism is free to move. Using the Jaguar Land Rover approved diagnostic equipment, clear the Diagnostic Trouble Code(s) and retest
Using the Jaguar Land Rover approved diagnostic equipment, perform a CAN network integrity test. Refer to the electrical circuit diagrams and check the high speed CAN bus (body) circuit for short circuit to ground, short circuit to power, open circuit, high resistance. Repair the wiring harness as necessary
Using the Jaguar Land Rover approved diagnostic equipment, clear the Diagnostic Trouble Code(s) and perform routine - On Demand Self Test. If the fault persists, install a new vehicle immobilizer control module