DTC U2300-56: Central Configuration - Invalid/Incomplete configuration: Action
- Using the Jaguar Land Rover approved diagnostic equipment, inspect the GWM software is up to date and matching the vehicle Bill Of Materials (BOM). Update if required
- Using the Jaguar Land Rover approved diagnostic equipment, inspect the ADC A2B (F1 26) calibration is up to date and matching the vehicle Bill Of Materials (BOM). Update if required
- Using the Jaguar Land Rover approved diagnostic equipment, Inspect the Gateway Module (GWM) is transmitting the CCF (ESSCalNo and A2BConfigurationNo) through the high speed CAN network. Update if required
- Using the Jaguar Land Rover approved diagnostic equipment, reset the AAM (11 01)
- Using the Jaguar Land Rover approved diagnostic equipment, clear the Diagnostic Trouble Codes (14 FF FF FF) and retest
- Using the Jaguar Land Rover approved diagnostic equipment, read the Snapshot Data Identifier 19 (SID19) Diagnostic Trouble Codes (19 02 08). If the Diagnostic Trouble Code persists raise a TA