DTC B12BD-76: Rear Camera - Wrong mounting position: Action

NOTE: DO NOT replace the near field sensing module for this DTC

Using the Jaguar Land Rover approved diagnostic equipment inspect the status bits for this DTC on the DTC appropriate service information. For this DTC, any one of the following combination status bits need to be set for the DTC to be valid (for example, there is a "Yes" against all of the status bits listed below)
- Test Failed (Bit 0)
- Test Failed This Operation Cycle (Bit 1)
- or
- Confirmed DTC (Bit 3)
If none of the above combinations are valid ignore this DTC (the customer may not have experienced non-operation of the near field sensing system features)
If the DTC is valid (any one of the combinations is true) follow the instructions below
Make sure that the camera is installed correctly, not dislodged or loose in the camera housing. Inspect for damage to the camera and housing and rectify as required
If the camera is installed correctly and no damage is evident, clear the Diagnostic Trouble Code(s) and retest