DTC C1007-19: Right Power Side Step Motor - Circuit current above threshold: Action
- Refer to the electrical circuit diagrams, unplug the harness from the deployable side step motor and check the right deployable side step deploy and stow circuits for short circuit to ground, short circuit to power:
- If the deployable side step is not moving and a short circuit is present at the deploy or stow circuits when disconnected from the motor, repair or replace the vehicle harness as required. Clear DTC and retest
- If the deployable side step is not moving and a short circuit cannot be detected at the deploy or stow circuits when disconnected from the motor, check for short circuit between the corresponding motor pins. If a short is detected at the motor, replace the deployable side step motor assembly as required. Clear DTC and retest