DTC B1D24-13: Glow Plug - Circuit open: Action
NOTE:
- The fuel fired booster heater contains many serviceable components. It should not be necessary to install a new fuel fired booster heater to rectify this fault.
- To check the operation of the fuel fired booster heater, perform routine - Auxiliary Heater (AHCM) Activation Test (0x900A). Repeat the routine if excessive smoke is emitted from the fuel fired booster heater exhaust.
- Refer to the appropriate system wiring diagrams and check the fuel fired booster heater glow plug circuit for open circuit, high resistance. Repair the wiring harness or install a new fuel fired booster heater glow plug as necessary