DTC B1D24-64: Glow Plug - Signal plausibility failure: Action
NOTE:
- This DTC is set when a flame is detected before combustion is activated.
- The fuel fired booster heater contains many serviceable components. It should not be necessary to install a new fuel fired booster heater to rectify this fault.
- To check the operation of the fuel fired booster heater, perform routine - Auxiliary Heater (AHCM) Activation Test (0x900A). Repeat the routine if excessive smoke is emitted from the fuel fired booster heater exhaust.
- Using the Jaguar Land Rover approved diagnostic equipment, clear the Diagnostic Trouble Code(s) and retest. If the fault persists, install a new fuel fired booster heater glow plug and retest. If the fault persists, install a new fuel fired booster heater control module as necessary