DTC B1538-53: Electrically Deployable Tow Bar Movement Motor - Deactivated: Action
NOTE:
To re-enable the deployable towbar, perform routine - Operate Towbar.
- Refer to the electrical circuit diagrams and check the deployable towbar stow/deploy motor circuit for short circuit to ground, short circuit to power, open circuit, high resistance. Repair the wiring harness or install a new deployable towbar assembly as necessary
- Using the Jaguar Land Rover approved diagnostic equipment, reconfigure the towbar control module with the latest level software
- Using the Jaguar Land Rover approved diagnostic equipment, clear the DTCs and retest. If the fault persists, install a new towbar control module
- Using the Jaguar Land Rover approved diagnostic equipment, clear the DTCs and retest. If the fault persists, install a new deployable towbar assembly