DTC C1037-26: Pressure Control Valve Pressure Sensor - Signal rate of change below threshold: Action
- Check dynamic response hydraulic fluid levels. Check the dynamic response reservoir and primary hydraulic circuit for leaks. Repair or replace as required
- Refer to the electrical circuit diagrams and check the pressure control valve pressure sensor circuit for short circuit to another circuit. Repair circuit as required, clear the DTCs and retest
- Clear adaptive data. Clear the DTCs and retest
- Check operation of dynamic response hydraulic pump drive. Rectify as required. Clear the DTCs and retest
- If the fault persists, install a new dynamic response valve block as required and reset adaptive data. Clear the DTCs and retest