DTC P061D-62 Internal Control Module Engine Air Mass Performance - Signal compare failure: Action

WARNING: This page is about a different variant/trim than selected.

Prioritized Checks to Perform
- Refer to the appropriate system wiring diagrams and check the powertrain control module power and ground circuits for open circuit, high resistance. Check the electrical connectors for evidence of water ingress. Check the terminals for damage and corrosion. Repair the wiring harness as necessary
- Using the Jaguar Land Rover approved diagnostic equipment, run application - ECU Diagnostics/Powertrain Control Module (PCM)/Update ECU
- Using the Jaguar Land Rover approved diagnostic equipment, run application - ECU Diagnostics/Powertrain Control Module (PCM)/Clear Diagnostic Trouble Code(s). Retest. If the fault persists, install a new powertrain control module: Run application - ECU Diagnostics/Powertrain Control Module (PCM)/Replace ECU