DTC P0A1E-13: Starter/Generator Control Module - Circuit open: Action
- Prioritized Checks to Perform
- Inspect connectors for signs of water ingress and pins for damage and/or corrosion
- Refer to the electrical circuit diagrams and check the belt integrated starter generator circuit for short circuit to ground, short circuit to power, open circuit, high resistance. Repair the wiring harness as necessary
- Check for mechanical integrity
- Install a new belt integrated starter generator
- Using the Jaguar Land Rover approved diagnostic equipment, run application - ECU Diagnostics/Powertrain Control Module (PCM)/Clear Diagnostic Trouble Code(s). Retest