DTC U3000-46: Control Module - Calibration/parameter memory failure: Action
NOTE:
- This DTC is only set as part of self test diagnostic routine - On Demand Self Test 0202
- This DTC indicates that the contents of non volatile memory containing the odometer have been corrupted or inconsistent, potentially due to an internal hardware failure
- Using Jaguar Land Rover approved diagnostic equipment, clear the Diagnostic Trouble Code(s) and retest. If the fault persists, install a new instrument panel cluster control module
- If a new instrument panel cluster control module is installed, perform routines - Learn VIN (0x0404) and Write Odometer Value (0x8018)